Panasonic KX-TD1232JT Programming Manual Download

Page: 301 / 402

4.3

TIE Line Routing Table Programming

E & M Programming

301

[341]

TIE Modify Removed Digit / Added Dial

Description

Assigns the removed digits and added numbers of a received TIE call. Digits are removed and
added from the beginning of the dialled digits.

Selection

•

Location number: 01 through 32

•

Number of digits to be deleted: 0 through 4 (0=no deletion)

•

Number to be added: 4 digits (max.)

Default

All locations – Deleted digit=0; Added Dial=Blank

Programming

Enter 341.

Display: TIE Remove/Add

Press NEXT.

Display: Location NO?

Enter a location number.

To enter location number 01, you can also press NEXT.

Display example: 01:0,

Enter the number of digits to be deleted.

To change the current entry, press CLEAR and enter the new number.

Press

to programme the number to be added.

Enter the number to be added.

To change the current entry, press CLEAR and enter the new number.

Press STORE.

To programme another location, press NEXT or PREV, or SELECT and the desired
location number.

Repeat steps 4 through 8.

10.

Press END.

Conditions

Each added number has a maximum of 4 digits, consisting of 0 through 9.

Summary of Contents for KX-TD1232JT



















































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232JT

Reviews:

Related manuals for KX-TD1232JT

Brands by name

Popular brands

Panasonic KX-TD1232JT, Programming Manual

Search results

Summary of Contents for KX-TD1232JT

Reviews:

Related manuals for KX-TD1232JT

Brands by name

Popular brands