Panasonic KX-TCD705NL Operating Instructions Manual Download Page 53

Page: 53 / 60

➡

Before Requesting Help

Problem

Cause and Remedy

You cannot redial.

• If the last number dialled was more than 24 digits

long, the number will not be redialled correctly.

You cannot program the handset

• Programming is not possible while the unit is in the

settings such as display language

•

talk, speakerphone or intercom mode or when
viewing the Caller List/Phonebook list.

• Do not pause for over 60 seconds while

programming.

• Make sure that the handset is in the standby mode.

You cannot store a name or phone

• You cannot store a name and phone number while

number in the Phonebook.

•

the unit is in the talk, speakerphone or intercom
mode.

• Do not pause for over 60 seconds while storing.

While programming or searching,

• To answer the call,

Z O

the unit starts to ring and stops

•

Start again from the beginning after hanging up.

the program/search.

The display goes to the standby

• Do not pause for over 60 seconds while searching.

mode while viewing the Caller List
or phonebook.

does not function.

• The handset is too far from the base unit.
• The handset is engaged in an outside call or is

viewing the Caller List or Phonebook.

The paged handset does not

• The handset is not in the same radio area.

answer.

• The handset is engaged in an outside call.
• The handset has been cancelled or has not been

registered. Register the handset in the base unit
(pages 39, 41).

While using the intercom, 2 tones

• A call is being received. To answer press

then

The unit misdials when connected

• Check the pause function (pages 44).

to a PBX.

sound.

30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 53

Summary of Contents for KX-TCD705NL





























































Search results

Summary of Contents for KX-TCD705NL

Reviews:

Related manuals for KX-TCD705NL

Brands by name

Popular brands

Panasonic KX-TCD705NL, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD705NL

Reviews:

Related manuals for KX-TCD705NL

Brands by name

Popular brands