background image

Using the Phonebook

Finding Items in the Phonebook

Make sure that the unit is in the standby mode.
All phonebook items are sorted in the following order:
Alphabet Letter/Symbol/Number/Telephone Number (when a name is not stored).

1.

Z Á

to enter the phonebook.

• The first item is displayed.
• If ‘

No Stored Memory

’ is displayed, the phonebook is empty. The handset will

return to the standby mode.

2.

Z U

or 

S

until desired name is displayed.

To search for a name by initial

1.

Z Á

to enter the phonebook.

• The first item is displayed.

2.

Press the dialling button for the first letter of the desired name until any name
with the same initial is displayed.
•  The letters are printed on the dialling buttons.

Eg. To find ‘Felix’, 

Z C

repeatedly  until the first item under ‘F’ is displayed.

3.

Z U

until the desired name is displayed.

Dialling from the Phonebook

Make sure that the unit is in the standby mode.

1.

Z Á

.

2.

Z U

or 

S

until desired name is displayed.

• You can also search for an item by initial.
• To exit the phonebook,

Z P

.

3.

Z O

or 

%

.

• The number is dialled automatically.

4.

To hang up,

Z P

or place the handset on the base unit.

22

30678_KX-TCD705 Dutch_a_English  22/6/01  9:22 am  Page 22

Summary of Contents for KX-TCD705NL





























































Reviews: