Panasonic KX-TCD705NL Operating Instructions Manual Download Page 3 | Manualshive

Page: 3 / 60

background image

3

Safety Instructions

Take special care to follow the safety suggestions listed below.

Installations
Environment
1) Do not use this unit near water—for example, near a bathtub, washbowl, sink, etc.

Damp basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators, cookers, etc. It also

should not be placed in rooms where the temperature is less than 5°C or greater than
40°C.

3) The AC adaptor is used as the main disconnect device, ensure that the AC outlet is

located/installed near the unit and is easily accessible.

Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not spilled into,

the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or
shock.

3) Place the unit on a flat surface.

Lightning Surge
This unit has already been equipped with a built-in lightning protection circuit. However,
we recommend that you install the following options, if your area has frequent lightning
strikes.
1) Lightning protection on the telephone line.
2) Lightning protection on the power source.
To install the above options, please contact your local sales shop.
•

Lightning damage is not covered in the warranty even if lightning protection is installed.

30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 3

«
1
2
3
4
5
...
»

Summary of Contents for KX-TCD705NL





























































Reviews:

No comments

Related manuals for KX-TCD705NL

Brand: BT Pages: 2

Brand: Verizon Pages: 55

Brand: Ryobi Pages: 16

Brand: Olympia Pages: 26

Brand: Dual Pages: 12

Brand: EMPORIA Pages: 16

Brand: Sagem Pages: 170

Brand: Uniden Pages: 1

IDECT X3I SYSTEM

Brand: Binatone Pages: 22

Brand: AEG Pages: 84

Brand: LG-Ericsson Pages: 718

Brand: Jabra Pages: 19

Brand: Yealink Pages: 2

Brand: Yealink Pages: 20

Verizon One Talk W60B

Brand: Yealink Pages: 117

Brand: Orchid Telecom Pages: 2

Brand: Etross Pages: 11

Brand: Cincinnati Bell Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands