Panasonic KX-TCD705NL Operating Instructions Manual Download Page 7

Page: 7 / 60

➡

◆

Installing the Batteries in the Handset

◆

Battery Strength

You can check the present battery
strength on the display.

◆

Recharge

When “

” flashes or the unit beeps every 15 seconds, recharge the batteries.

Chapter 1

◆

Battery Information

After your batteries are fully charged:

• Battery life may vary depending on usage conditions, such as:

– when viewing the Caller ID Caller List,
– when the handset is in the speakerphone mode and
– ambient temperature.

• Clean the handset charge contacts with a soft, dry cloth once a month. Clean

more often if the unit is subject to grease, dust or high humidity. Otherwise the
batteries may not charge properly.

•

If the batteries are fully charged, you do not have to place the handset on the base unit
until “

” flashes. This will maximise the battery life.

•

The batteries cannot be overcharged.

Operation

Ni-MH battery life (Included)

Ni-Cd battery life (optional)

While in use (Talk)

Up to about 20 hours

Up to about 12 hours (based on 800m/A per hour)

While not in use (Standby)

Up to about 160 hours

Up to about 100 hours

◆

Battery Charge

At the time of shipment, the batteries are not
charged. To charge, place the handset on the
base unit. Please charge the batteries for
approximately 10 hours before initial use.
During charging, the battery icon is as shown.

Battery strength

Fully charged

Medium

Low

No power

Battery icon

(Flashing)

• If

the

rechargeable
batteries are not
inserted correctly,
the handset will
not work.

30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 7

Summary of Contents for KX-TCD705NL





























































Search results

Summary of Contents for KX-TCD705NL

Reviews:

Related manuals for KX-TCD705NL

Brands by name

Popular brands

Panasonic KX-TCD705NL, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD705NL

Reviews:

Related manuals for KX-TCD705NL

Brands by name

Popular brands