Panasonic KX-TCD505NL Operating Instructions Manual Download Page 42

Page: 42 / 90

SMS Feature (Text Message)

Reading/Displaying Messages in the Incoming List

To exit the operation, press

at any time.

•

If there is a “ ” icon placed against the time, this means the message has been read
or displayed previously.

•

If the list is accessed and no messages have been received, “

Receive List

Memory Empty

” is displayed.

•

If the base unit does not have sufficient memory to receive a message, the display will
show “

SMS lists are memory full. Delete messages.

”.

•

Certain SMS service providers may attach a 1-digit number to the sender’s phone
number. If so, the name will not be displayed even if the name and number have been
stored in the phonebook.

Press

JOYSTICK

(or move).

Select “

SMS

”.

Select “

Receive List

”.

Move the

JOYSTICK

down.

•

The most recent sender’s details are

displayed.

•

If the name and number have been

stored in the phonebook, the name is

also displayed.

•

You can delete a message by

pressing

then selecting “

Yes

”.

Select the desired message.

Scroll through the message to

read/

display

Go to step

on page 37 and 38.

New 2
Total 10

17.8 14:59

JOHN SMITH
0123456789

Time Received

Date Received

Name

Tel. No.

505NL_e.book Page 36 Thursday, July 10, 2003 4:56 PM

Summary of Contents for KX-TCD505NL



























































































Search results

Summary of Contents for KX-TCD505NL

Reviews:

Related manuals for KX-TCD505NL

Brands by name

Popular brands

Panasonic KX-TCD505NL, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD505NL

Reviews:

Related manuals for KX-TCD505NL

Brands by name

Popular brands