Panasonic KX-TCD505NL Operating Instructions Manual Download Page 37

Page: 37 / 90

Cor

less Tel

phone

SMS Feature (Text Message)

Entering a Number from the Caller ID List

Entering a Number from the Redial List

•

“

Sending Message

” is displayed after step

. The display returns to the standby

mode, then “

Transferring Message

” is displayed.

•

If the base unit does not have sufficient memory to send a message, the display will
show “

SMS lists are memory full. Delete messages.

”. The unit will then

return to the function menu.

•

Once you have created an SMS message, the unit will display “

Use Last Text?

”

each time you select “

Create

”. If you want to use the text of the last message sent

once again, move the

JOYSTICK

up to recall the last message.

•

If you try to send a message using a phone number (Destination) over 20 digits long
from one of the Phonebook, Caller ID or Redial lists, “

Invalid Number

” is displayed

and the display returns to “

”.

•

The maximum message length is 160 characters. Please consult your SMS service
provider for further details.

•

69 messages can be memorized when you enter 80 characters/1 message.

•

If your phone is connected to PBX (Private Branch eXchange: private branch
exchange), see page 40 to enter the destination number.

Follow steps

on the previous page, then:

Select the desired item.

twice

Go to step

Follow steps

on the previous page, then:

Press

RIGHT SOFT

KEY

Select the desired item.

twice

Go to step

Follow steps

on previous page and above, then:

“

Save?

” is displayed, then select “

Yes

” or “

”.

(If “

Yes

” is selected, “

Saved Message

” is displayed.)

Select “

Send

”.

505NL_e.book Page 31 Thursday, July 10, 2003 4:56 PM

Summary of Contents for KX-TCD505NL



























































































Search results

Summary of Contents for KX-TCD505NL

Reviews:

Related manuals for KX-TCD505NL

Brands by name

Popular brands

Panasonic KX-TCD505NL, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD505NL

Reviews:

Related manuals for KX-TCD505NL

Brands by name

Popular brands