Panasonic KX-TCA364 Operating Instructions Manual Download Page 60 | Manualshive

Page: 60 / 60

background image

PNQX2812XA

KK0410KH2120 (CE/UK/AL)

Pencarn Way, Duffryn, Newport, South Wales, NP10 8YE, United Kingdom

Copyright:

This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced
for internal use only. All other reproduction, in whole or in part, is prohibited without the written
consent of Panasonic System Networks Co., Ltd.

© Panasonic System Networks Co., Ltd. 2010

Following declaration is applicable to KX-TCA364CE/KX-TCA364UK only

1321

This device is a DECT Portable station operating in the frequency band of 1880 MHz to 1900 MHz.
The usage of this device is generally allowed in all EU countries.

Panasonic System Networks Company U.K. Ltd. declares that this equipment is in compliance
with the essential requirements and other relevant provisions of Radio & Telecommunications
Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are
available for download by visiting:

http://www.doc.panasonic.de

Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

http://www.doc.panasonic.de

«
...
58
59
60

Summary of Contents for KX-TCA364





























































Reviews:

No comments

Related manuals for KX-TCA364

Brand: Yealink Pages: 2

Brand: NEC Pages: 158

ElectraElite IPK

Brand: NEC Pages: 38

ELECTRA ELITE IPK II

Brand: NEC Pages: 56

Brand: NEC Pages: 8

Brand: NEC Pages: 8

Brand: NEC Pages: 334

Brand: NEC Pages: 12

Brand: Waters Pages: 21

Brand: Swyx Pages: 4

Brand: Uniden Pages: 32

CrystalTone Plus

Brand: Ultratec Pages: 16

Dialog 4106 Basic

Brand: Aastra Pages: 35

Brand: Uniden Pages: 7

Brand: TMC Pages: 91

POLYCOM SOUNDSTATION IP 6000

Brand: Armstrong Pages: 2

Brand: Hyundai Pages: 26

Spectrum Plus Series

Brand: Telematrix Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands