1.1 General Features
54
Feature Manual
Conditions
•
Automatic Configuration for Outside (CO) Line Type
The pulse rate for outside (CO) lines that have been set to "Pulse" or "Call Block" mode (
Programming Manual References
[PT Programming]
[119] Redialing after Pulse to Tone Conversion
[PC Programming]
9.1.11 Detail [1-10]—CO—Redialing after Pulse to Tone Conversion
9.3.3 Detail [3-3]—Dial Mode, Pulse Speed
Feature Manual References
1.1.5 Automatic Configuration for Outside (CO) Line Type
1.1.104 Pulse to Tone Conversion
1.1.40 Direct In Line (DIL)
Description
Directs incoming outside (CO) line calls to a preprogrammed destination based on the outside (CO) line
carrying the call. Each outside (CO) line can have a different destination for each time service mode.
[Programming Example]
The table can be programmed for each outside (CO) line.
Call Blocking
If your telephone company or a host PBX can receive both DTMF and
Pulse signals but the contract specifies Pulse lines, select this mode.
When dialing with a touch-tone telephone, only Pulse signals will be sent
to the telephone company.
Mode
Description
Summary of Contents for KX-TA824
