Panasonic KX-TA824 Feature Manual Download

Page: 15 / 178

1.1 General Features

Feature Manual

This feature can be turned on and off by dialing "1" while the extension is on-hook and idle, if BGM is
enabled through system programming (

[626] BGM Control for APT).

Installation Manual References

2.8.1 Connecting Peripherals

Programming Manual References

[PT Programming]

[111] Music on Hold

[626] BGM Control for APT

[PC Programming]

9.1.2 Main [1-2]—Music on Hold

9.2.1 Main [2-1]—BGM Control for APT

Feature Manual References

1.1.85 Music on Hold

Operating Manual References

1.3.6 Background Music (BGM)

1.1.8

Built-in Voice Message (BV)

Description

If an optional voice message card is installed in the PBX, a caller can leave a voice message in a user's
personal message area or the PBX's common message area. Information on the recorded messages is
automatically logged in the Incoming Call Log of the extension, where it can be viewed later or used to play
back the original message (

1.1.18 Call Log, Incoming).

The optional voice message card has 2 voice message resources (Built-in Voice Message [BV] resource 1
and BV resource 2), and every extension must belong to one of these resources based on system
programming (

[621] BV Resource).

Extension users other than the operator or manager can access the following options:

–

Personal BV outgoing messages (OGMs)

–

Personal voice messages (left by callers via Call Forwarding [FWD] or Direct Message)

Messages can be recorded, played, and erased by that extension's user.

The operator or manager can access the following options:

–

Personal BV OGMs for the operator or manager

–

Personal voice messages (left by callers via FWD or Direct Message for the operator or manager)

–

Common BV OGMs for the company

–

Common voice messages (left by callers for the company)

Messages can be recorded, played, and erased by the operator or manager only.

Up to 125 voice messages with a total recording time of 60 minutes (

[807] BV Total Recording Time) can

be logged per BV resource. All personal/common message areas within each BV resource share the total
space of the resource. For example, in BV resource 1, if the common message area currently has 10

Summary of Contents for KX-TA824



















































































































































































Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands

Panasonic KX-TA824, Feature Manual

Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands