Panasonic KX-TA824 Feature Manual Download

Page: 96 / 178

1.1 General Features

Feature Manual

Programming Manual References

[PT Programming]

[009] Extension Number

[115] Extension Ring Tone Pattern

[128] Ringback Tone Pattern

[604] Extension Name

[PC Programming]

9.1.3 Numbering Plan [1-3]

9.1.11 Detail [1-10]—Extension—Ring Tone Pattern, Extension—Ringback Tone Pattern

9.2.3 PT personal settings [2-3]—Alternate Receiving

Feature Manual References

1.1.61 Flexible Buttons

2.2.1 Tones/Ring Tones

Operating Manual References

1.3.3 Alternate Calling—Ring/Voice

1.3.51 Intercom Call

3.1.2 Personal Feature Assignment—Alternate Receiving—Ring/Voice

3.1.3 Flexible Button Assignment—DSS button

1.1.70 LED Indication

Description

The LED (Light Emitting Diode) of the Message/Ringer Lamp and the following buttons (Line Status Buttons
and Corresponding Extension Status Button) can indicate line status with a variety of light patterns.

Line Status Buttons:

Single-CO (S-CO), Group-CO (G-CO), Other-CO (O-CO), INTERCOM

Corresponding Extension Status Button:

Direct Station Selection (DSS)

Light Pattern of the Message/Ringer Lamp

•

Incoming call from an outside (CO) line/another extension: Red flashing

•

Message(s) present (no incoming call): Red on

•

No messages present and no incoming call: Off

Type

Description

Ringback Tone

Indicates the call is being received at the called party's extension.

Confirmation Tone

Indicates the called party has set voice-calling.

Busy Tone

Indicates the called party's extension is busy.

DND Tone

Indicates the called party has set Do Not Disturb (DND).

Summary of Contents for KX-TA824



















































































































































































Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands

Panasonic KX-TA824, Feature Manual

Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands