Station Features and Operation (PT/SLT)
User Manual
319
To talk to the third party after placing the current call on hold
Conditions
•
This feature can be enabled to any PTs (other than KX-T7400 series PT) by System
Programming.
•
Whisper OHCA is activated when both calling and called extensions are using the KX-
T7400 series PTs by default. If either one of them is a non-KX-T7400 series PT, OHCA
(when the called extension is an OHCA-capable PT) or BSS is activated.
However, Whisper OHCA between two non-KX-T7400 series PTs can be enabled by
System Programming < Section 2.8 System Option, "32. Whisper OHCA to extensions
other than T74XX>.
•
BSS, OHCA and Whisper OHCA do not function, if the other extension is a DN type PT.
Other conditions are the same as that of "Off-Hook Call Announcement (OHCA)."
Programming Guide References
•
2.3 Numbering Plan
– Call Waiting Set / Cancel
•
2.4 Class of Service (COS)
– Off-Hook Call Announcement (OHCA)
•
2.8 System Option
– Whisper OHCA to extensions other than T74XX
Features Guide References
1.6 Originating Features
•
Busy Station Signaling (BSS)
7420 / 7425 / 7431 / 7433 / 7436
Press HOLD.
Talk.
HOLD
The current call is placed on hold.
The INTERCOM indicator light flashes green slowly.
If Whisper OHCA is activated by the other party when you are engaged in a call, you
hear a confirmation tone. Then you will be engaged in both calls with the current
caller (two-way) and the third party (one-way).
Summary of Contents for KX-T7230
