Station Programming
92
User Manual
2.2.12
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the following
three line preferences:
a)
No Line Preference
b)
Idle Line Preference
c)
Prime Line Preference (INTERCOM) (— default
*1
)
Follow the programming procedure according to your selection.
Note
•
If "Idle Line Preference," "No Line Preference" or "Prime Line Preference (S-CO, G-
CO or L-CO)" is selected, it is
not
possible to access any PT features after going off-
hook. To access these PT features, press the INTERCOM (ICM type PT) or PDN (DN
type PT) button before or after going off-hook.
No Line Preference — Outgoing (Assignment)
When you go off-hook to make a call, you are not connected to any line. You must choose the
line.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
*1
If PT is DN type, then the default is PDN.
PT
Dial 1.
Press
STORE
.
Dial 1.
1
1
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
The display shows the current
status.
<PT Display Example>
Pref.Out:No
Summary of Contents for KX-T7230
