Panasonic KX-NS500 User Manual Download Page 14

Page: 14 / 396

1.1 Before Operating the Telephones

1.1.1 For Your Safety

To prevent personal injury and/or damage to property, be sure to observe the following safety precautions.

The following symbols classify and describe the level of hazard and injury caused when this unit is
operated or handled improperly.

WARNING

This notice means that misuse could result in death
or serious injury.

CAUTION

This notice means that misuse could result in injury
or damage to property.

The following types of symbols are used to classify and describe the type of instructions to be
observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.

This symbol is used to alert users to a specific operating procedure that must be followed in
order to operate the unit safely.

User Manual

1.1.1 For Your Safety

Summary of Contents for KX-NS500













































































































































































































































































































































































































Search results

Summary of Contents for KX-NS500

Reviews:

Related manuals for KX-NS500

Brands by name

Popular brands

Panasonic KX-NS500, User Manual

Search results

Summary of Contents for KX-NS500

Reviews:

Related manuals for KX-NS500

Brands by name

Popular brands