Panasonic KX-NCS1101, Quick Reference Manual, Page: 56 / 72

3.
Select the extension number to be assigned as a PT for making calls from a PS using the drop-down lists.
Note
Up to 8 PTs for making calls from a PS can be assigned.
4.
Click OK .
Note
Do not use the registered PT as an ordinary telephone. If the registered PT is used, a PS user cannot make
calls from PA until the registered PT becomes idle.
3.5.2 Making Calls from a PS Using PA
1.
Double-click a telephone number from Contact List or History on PA.
The registered PT calls your PS.
2.
Answer the call by pressing the TALK button on the PS.
The registered PT transfers the call to the other party. While the call is being transferred, you will hear the
hold music or a ringback tone, depending on the PBX settings.
Note
•
The registered PT becomes idle after the call is transferred.
•
During a conversation, a PS user cannot use Call Control features in PA.
•
You can set an access code for your PS, which is dialled before the call is transferred from the PT to
the destination. For example, by setting the access code to *47 + ext. no of PS + PIN, the CLIP
information of the PS extension is sent to the called party, rather than the PT’s CLIP information.
•
The Walking COS feature for the PS’s extension must be enabled. This feature is configured through
PBX programming, and is enabled by default. For details on Walking COS, please refer to your PBX
documentation or consult your dealer.
56 Quick Reference Guide Document Version 2008/2
3.5.2 Making Calls from a PS Using PA