13 Initializing the IP Cell Station
If the IP-CS does not operate properly, initialize the IP-CS. Before initializing the IP-CS, try the system feature
again to confirm whether there definitely is a problem or not.
The settings that are configured by using the IP Terminal Maintenance Console are changed back to their
factory default by initializing the IP-CS. For more details, refer to "E Information about IP Terminal Maintenance
Console".
While initializing the IP-CS, calls cannot be made or received and ongoing conversations will be disconnected.
1.
Switch the Initialized Mode switch from OFF to ON.
DIP Switch
1
2
3
4
5
6
7
8
OFF
ON
Initialized Mode Switch
2.
Supply electricity to the IP-CS using an AC adaptor, PoE hub, or PoE adaptor (turn on the IP-CS).
3.
While the LED indicator flashes red (Moderate Flashing: 120 times per minute), switch the Initialized Mode
switch from ON to OFF.
Note
When the LED turns off for a while then flashes red, initialization is complete.
64
Quick Installation Guide
Document Version 2009-12
13 Initializing the IP Cell Station
