Note
For details about other parameters on this screen, refer to the PC Programming Manual or the On-line
Help for your PBX.
4.
Click
Apply
.
Note
Please wait about one minute after clicking
Apply
to allow changes to take effect.
5.
Click
Command
to return the status of the port to "INS".
De-registering the IP-CS
When uninstalling an IP-CS that has been installed once, de-register the IP-CS.
Note
When uninstalling IP-CSs that are supplying the clock signal, air synchronization is lost. If there is an IP-CS
that is synchronized with the IP-CS that is being uninstalled, reconstruct the air synchronization tree
beforehand so that the uninstalled IP-CS is not supplying the clock signal to any IP-CSs.
1.
a.
Under
Configuration
, click
Slot
.
b.
For the KX-NCP500/KX-NCP1000, move the
mouse pointer over the PBX image of
IPCMPR
Virtual Slot
at the top of the screen, and click
Select Shelf
. For the KX-TDE100/KX-TDE200/
KX-TDE600, move the mouse pointer over the
white PBX image of
IPCMPR Virtual Slot
(for the
KX-TDE100/KX-TDE200)/
IPCEMPR Virtual Slot
(for the KX-TDE600) at the bottom of the screen,
and click
Select Shelf
. Move the mouse pointer
over the V-IPCS4 card. A menu will be shown
under the mouse pointer.
c.
Click
Port Property
.
2.
Click
De-registration
.
A dialog box will appear. Registered IP-CSs are
displayed on the left.
3.
a.
Highlight IP-CSs and click the right arrow to select
them for de-registration.
b.
Click
Next
.
A dialog box will appear.
c.
Click
Confirm
.
If the de-registration is successful, the dialog box
will show "De-registration succeed!".
d.
Click
Close
.
Once the IP-CS is successfully de-registered, the status of the IP-CS will update to show "None".
Document Version 2009-12
Quick Installation Guide
51
8 Registering IP Cell Stations