Panasonic KX-HDV230NE Operating Instructions Manual Download

Page: 22 / 80

Adjusting the Volume

Adjusting the Receiver/Speaker/Headset Volume

1. [

]/[

] volume key: Adjust the volume during a conversation.

Note

Both receiver volume and headset volume are adjusted in training mode. See “Training Mode”,
Page 30.

Adjusting the Ringer Volume or Turning the Ringer Off
[In standby mode]

1. [

]/[

] volume key: Adjust the ringer volume.

Note

For details about setting the ringer pattern, see “Incoming Option”, Page 61.

Adjusting the Ringer Volume or Turning the Ringer Off while Ringing

While receiving a call, do the following to adjust the ringer volume or turn the ringer off:

Note

If you attach a headset while receiving an incoming call, ringing will be heard from the speaker.

To adjust the ringer volume

1. [

]/[

] volume key: Adjust the ringer volume.

Back

: Exit.

*1 The adjusted volume level will also be used for subsequent calls.

To turn the ringer off

Incoming/Outgoing Call Log

Displaying the Incoming Call Log
[In standby mode]

1. [

]

2. [

]/[

]: "Incoming Log"

Note

If "Missed Calls" is displayed on the LCD in standby mode, select "Missed Call" at step 2.

Displaying the Outgoing Call Log
[In standby mode]

Call Log

2. [

]/[

]: "Outgoing Log"

Note

If "Missed Calls" is displayed on the LCD in standby mode, select "Missed Call" at step 2.

Before Operating the Telephones

Summary of Contents for KX-HDV230NE

















































































Search results

Summary of Contents for KX-HDV230NE

Reviews:

Related manuals for KX-HDV230NE

Brands by name

Popular brands

Panasonic KX-HDV230NE, Operating Instructions Manual

Search results

Summary of Contents for KX-HDV230NE

Reviews:

Related manuals for KX-HDV230NE

Brands by name

Popular brands