Making Calls
R
You can confirm that the number was dialed correctly before calling (Predialing) by entering the
number, then going off-hook.
R
To clear an entire number while predialing, press
Clear
for more than 1 second.
R
If an outside call is received from a phone number stored in the Phonebook, the number and name of
the caller will be displayed in the call log.
R
To cancel dialing, press [CANCEL].
R
To insert a 3 second pause between phone numbers, press
Pause
.
It is useful when you want to operate voice mail service without listening to pre-recorded
announcement, for example. Repeat as needed to create longer pauses.
*1 This soft key is displayed only when configured on the telephone. Contact your administrator for
further information.
Basic Calling
Calling by Dialing
1. In standby mode, go off-hook.
2. Dial the outside party’s number.
3.
Call
4. Go on-hook to end the call.
Note
R
You can use a specific line by pressing a function key assigned to a line (see “Changing the Function
Keys (Program Keys and DSS Keys)”, Page 45) or by using the Line Status screen (see “Checking
the Line Status”, Page 42).
R
To dial a new number without going on-hook, follow the procedure below.
1.
Menu
2. [
D
]/[
C
]: "Flash/Recall"
3.
OK
Predialing
In standby mode, you can start dialing while still on-hook. After dialing the number, go off-hook to begin
the call.
Easy Dialing
Making a call using the redial list
The last phone number dialed is stored in the redial list (32 digits max.).
[In standby mode]
1.
/[REDIAL]
2. Go off-hook.
26
Making Calls
Summary of Contents for KX-HDV230NE
Page 12: ...KX HDV230RU N U KL P O M J QRS BC F A E G D H I T 12 Before Operating the Telephones ...
Page 77: ...77 Notes ...
Page 78: ...78 Notes ...
Page 79: ...79 Notes ...
