Call Forwarding/Do Not Disturb
You can have incoming calls automatically forwarded to another destination. You can also have incoming
calls rejected (Do Not Disturb).
To access the FWD/DND settings
1.
Menu
2. [
D
]/[
C
]: "Fwd/DND"
a
OK
3. If the unit has multiple lines, press [
D
] or [
C
] to select the desired line.
a
OK
4. [
D
]/[
C
]: Select the type of FWD or DND setting to apply.
a
OK
The settings are as follows:
R
DND: Enable Do Not Disturb
(All incoming calls are automatically rejected.)
R
Fwd(All): Enable Forward All Calls
(All incoming calls are forwarded.)
R
Fwd(Busy): Enable Forward Busy
(Incoming calls are forwarded only when your extension is in use.)
R
Fwd(NA): Enable Forward No answer
(An incoming call is forwarded if you do not answer the call within a certain amount of time.)
5. If a Forward setting is selected, enter a new forward destination number, or confirm and modify a
previously set forward destination number.
a
OK
Note
R
When Call Forwarding and/or Do Not Disturb is enabled,
and/or
appears on the display
in standby mode.
Listening to Voice Mail Messages
When you receive a voice message, "Voice MSG" is displayed.
You can check your new messages by accessing your mailbox.
[In standby mode]
1. Press and hold
/[MESSAGE].
2. [
D
]/[
C
]: Select the line on which
is displayed.
a
OK
Note
R
Step 2 is not necessary if only one line is configured on the telephone.
34
Before Leaving Your Desk
Summary of Contents for KX-HDV230NE
Page 12: ...KX HDV230RU N U KL P O M J QRS BC F A E G D H I T 12 Before Operating the Telephones ...
Page 77: ...77 Notes ...
Page 78: ...78 Notes ...
Page 79: ...79 Notes ...