Panasonic KX-HDV100 Page 30 Administrator'S Manual Download

Page: 30 / 286

Result Message

Description

Applicable Screens

Complete

The operation has successfully completed.

All screens except

4.6.7 Export Phonebook

Failed (Parameter Error)

The operation failed because:

•

Some specified values are out of range
or invalid.

All screens

Failed (Memory Access
Failure)

The operation failed because:

•

Access error to the flash memory
occurred while reading or writing the
data.

All screens

Failed (Transfer Failure)

The operation failed because:

•

A network error occurred during the
data transmission.

All screens

Failed (Busy)

The operation failed because:

•

The unit is in an operation that
accesses the flash memory of the unit.

All screens

•

When attempting to import/export the
phonebook data, the unit is on a call.

•

While transferring the phonebook data,
a call arrived at the unit.

4.6.6 Import Phonebook
4.6.7 Export Phonebook

Failed (Canceled)

The operation failed because:

•

While transferring the phonebook data,
the connection with the unit was
interrupted.

4.6.6 Import Phonebook
4.6.7 Export Phonebook

Failed (Invalid File)

The operation failed because:

•

Analysis of the received data failed.

4.6.6 Import Phonebook

Failed (File Size Error)

The operation failed because:

•

The size of the imported phonebook is
too large.

4.6.6 Import Phonebook

No Data

The operation failed because:

•

The imported phonebook file contains
no valid phonebook entries.

4.6.6 Import Phonebook

•

No phonebook entry is registered in the
export source the unit.

4.6.7 Export Phonebook

"Failed (Transfer Failure)" may not be displayed depending on your Web browser.

1.2 Firmware Update

1.2.1 Firmware Update

You can update the unit’s firmware to improve the unit’s operation. You can configure the unit so that it
automatically downloads the new firmware file from a specified location. The firmware update will be executed
when the unit is restarted.

Administrator Guide

Document Version 2015-02

1.2.1 Firmware Update

Summary of Contents for KX-HDV100































































































































































































































































































Search results

Summary of Contents for KX-HDV100

Reviews:

Related manuals for KX-HDV100

Brands by name

Popular brands

Panasonic KX-HDV100, Administrator'S Manual

Search results

Summary of Contents for KX-HDV100

Reviews:

Related manuals for KX-HDV100

Brands by name

Popular brands