Panasonic KX-HCM270, Operating Instructions Manual

Page: 105 / 138

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
Making holes on mortar wall
1.
Put Flexible Stand on the wall where you plan to install Network Camera and
mark the points where you are going to make holes.
2.
Make holes with an electric drill. Insert plastic plugs (customer provided) into
the holes and push them inside the holes with the hammer.
Note
Mortar wall is easy to come off in drilling.
3.
Mount the Flexible Stand by using the screws (accessories).
Change the drill depending on the
concrete wall or the tiled wall. Caulk around the holes
if necessary.
Plastic Plug
Hammer