Panasonic KX-FT932BR-B, Service Manual

Page: 58 / 173

58
KX-FT932BR-B
595 Receive error limit value set 1: 5 %
2: 10 %
3: 15 %
4: 20 % 1~4 2 Sets the number of acceptable error lines when the
FAX reconstructs the received data. Refer to
Receive
Problem (P.82).
596 Transmit level set 10 = -10 dBm 00~15 10 Selects the FAX transmission level. Refer to Sometime
there is a transmit problem (P.81) and Receive Prob-
lem (P.82).
598 Receiving sensitivity 43 = -43 dBm 20~48 42 Used when there is an error problem. Refer to The unit
can copy, but cannot either transmit/receive long
distance or international communications
(P.84).
710 Memory clear except History data Refer to Memory Clear Specification (P.59).
717 Transmit speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX transmis-
sion. Refer to
Sometime there is a transmit problem
(P.81)and The unit can copy, but the transmission
and reception image are incorrect (P.86).
718 Receive speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX recep-
tion. Refer to
Receive Problem (P.82) and The unit
can copy, but the transmission and reception image
are incorrect
(P.86).
722 Redial tone detect 1:ON 2:OFF 1, 2 1 Sets the tone detection mode after redialing.
731 CPC mode 1:A 2:B 3:OFF 1, 2, 3 3 Set the CPC signal detection mode from the converter.
745 Power ON film feed 1:ON 2:OFF 1, 2 1 Invalid function for thermal model.
763 CNG detect time for friendly reception 1:10 sec
2:20 sec
3:30 sec 1~3 3 Selects the CNG detection tone of friendly reception.
774 T4 timer X 100 msec 00~99 00 Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work well.
815 Sensor check See Test Mode (P.54).
852 Print test pattern See Test Mode (P.54).
853 Top margin 1~9 3 ----------
874 DTMF ON time X msec 06~20 10 ----------
875 DTMF OFF time X msec 06~20 10 ----------
880 History list ----------
881 Journal 2 list See Special service journal reports (P.76).
882 Journal 3 list See Special service journal reports (P.76).
961 The time transmitting the false ring back
tone X sec 01~10 05 Set the time transmitting the false ring back tone to the
line in TEL/FAX mode.
962 The operator calling time X sec 05~30 13 Set the operator calling time through the speaker in
TEL/FAX mode.
Code Function Set Value Effective
Range
Default Remarks