3. Telephone
30
3 Telephone
Making and Answering Calls
3.1 Making phone calls
3.1.1 Using the handset
1
Lift the handset and press
{
TALK
}
.
2
Dial the telephone number.
L
If noise interferes with the conversation,
press
{<}
to select a clear channel or
move closer to the base unit.
3
When finished talking, press
{
OFF
}
or place
the handset on the base unit.
Note:
L
If short beeps sound when you press
{
TALK
}
;
–
move closer to the base unit, or
–
place the handset on the base unit.
Then try again.
L
During a conversation using the handset, the
call can be switched to the base unit
speakerphone by pressing
{
DIGITAL SP-
PHONE
}
on the base unit.
Making hands-free phone calls
1.
Lift the handset and press
{
SP-PHONE
}
.
2.
Dial the telephone number.
3.
When the other party answers, talk into the
microphone.
4.
When finished talking, press
{
OFF
}
or place
the handset on the base unit.
To put a call on hold
Press
{
HOLD
}
.
L
To release the hold, press
{
TALK
}
or
{
SP-
PHONE
}
on the handset or
{
DIGITAL SP-
PHONE
}
on the base unit.
L
If you do not press a button for more than 6
minutes, a beep will sound every 30 seconds.
After 4 additional minutes on hold, the call will
be disconnected.
To redial the last number dialed from the
handset
Press
{
TALK
}
or
{
SP-PHONE
}
, then press
{
REDIAL/PAUSE
}
.
To redial using the redial list (Memory
redial)
The last 5 phone numbers dialed from the
handset are stored in the redial list.
1.
Press
{
REDIAL/PAUSE
}
.
L
The last number dialed will be displayed.
2.
Scroll to the desired number by pressing
{v}
or
{e}
repeatedly.
L
You can also scroll through the list by
pressing
{
REDIAL/PAUSE
}
.
L
To delete the displayed number, press
{
CLEAR
}
.
L
To exit the list, press
{
OFF
}
.
3.
Press
{
TALK
}
or
{
SP-PHONE
}
.
Adjusting LCD contrast
5 levels (high to low) are available.
Make sure the handset is idle.
1.
Press
{
FUNCTION
}
.
2.
Scroll to “
Program
” by pressing
{v}
or
{e}
repeatedly, and press
{>}
.
3.
Scroll to “
LCD contrast
” by pressing
{v}
or
{e}
repeatedly, and press
{>}
.
4.
Press
{v}
or
{e}
repeatedly to select the
desired contrast.
5.
Press
{>}
.
L
The current contrast will be displayed.
6.
Press
{
OFF
}
.
Speakerphone operation
L
Use the speaker in a quiet room.
L
Adjust the handset speakerphone volume
using
{v}
or
{e}
.
L
While talking using
{
TALK
}
, you can
switch to a hands-free phone conversation
by pressing
{
SP-PHONE
}
. To switch back,
press
{
TALK
}
.
{
TALK
}
{
FUNCTION
}
{
SP-PHONE
}
Microphone
{
OFF
}
{<}{>}{e}{v}
{
HOLD
}{
CLEAR
}
{
REDIAL/PAUSE
}
FPG376.book Page 30 Wednesday, July 30, 2003 6:28 PM
