Panasonic KX-FP701ME, Service Manual

Page: 65 / 207

65
KX-FP701ME
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 See Symptom/Countermeasure Table for long dis-
tance and international calls in The unit can copy, but
cannot either transmit/receive long distance or
international communications
(P.92). Refer to
Receive Problem (P.90) .
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time
1, 2 1 See Symptom/Countermeasure Table for long dis-
tance and international calls in The unit can copy, but
cannot either transmit/receive long distance or
international communications
(P.92). Refer to Some-
time there is a transmit problem (P.89).
595 Receive error limit value set 1:5 %
2:10 %
3:15 %
4:20% 1~4 2 Refer to Receive Problem (P.90).
596 Transmit level set X dbm
(10 = -10 dbm) - 15~00 11 Selects the FAX transmission level. Refer to Sometime
there is a transmit problem (P.89) and Receive Prob-
lem (P.90).
598 Receiving sensitivity X dbm
(40 = -40 dbm) -20~-48 42 Used when there is an error problem. Refer to The unit
can copy, but cannot either transmit/receive long
distance or international communications
(P.92).
Power is OFF/ON after changing this set value.
599 ECM frame size 1:256 2:64 1, 2 1 ----------
710 Memory clear except History data Refer to Memory Clear Specification (P.66).
717 Transmit speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX transmis-
sion. Refer to
Sometime there is a transmit problem
(P.89) and The unit can copy, but the transmission
and reception image are incorrect (P.94).
718 Receive speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX transmis-
sion. Refer to
Receive Problem (P.89) and The unit
can copy, but the transmission and reception image
are incorrect
(P.94).
722 Redial tone detect 1:ON 2:OFF 1, 2 2 Sets the tone detection mode after redialing.
745 Power ON film feed 1:ON 2:OFF 1, 2 1 When the power is turned on, the film is wound to take
up any slack.
763 CNG detect time for friendly reception 1:10 sec
2:20 sec
3:30 sec
1~3 3 Selects the CNG detection tone of friendly reception.
773 DIS-DIC interval 1: 500msec
2: 200msec 1, 2 2 This is similar to #594. The time interval from receiving
DIS to sending DCS can be changed to wait for the
echo canceler to recover.
774 T4 timer X 100 msec 00~99 0 Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work well.
815 Sensor & Vox check See Test Mode (P.60).
852 Print test pattern See Test Mode (P.60).
853 Top margin 1~9 9 ----------
861 Paper size 1:A4
2:LETTER 1, 2 2 ----------
874 DTMF ON time X 10 msec 06~20 10 ----------
875 DTMF OFF time X 10 msec 06~20 10 ----------
880 History list See History (P.69).
881 Journal 2 list See Printout Example (P.85).
882 Journal 3 list See Printout Example (P.85).
Code Function Set Value Effective
Range
Default Remarks