Panasonic KX-FP701ME Service Manual Download

Page: 159 / 207

159

KX-FP701ME

15.3.2. Document Jams - sending

1. Open the front cover by pulling up the centre part.

Remove the jammed document carefully (

2. Close the front cover securely.

Note:

• Do not pull out the jammed paper forcibly before opening

the front cover.

15.4. Cleaning

15.4.1. Document feeder/recording paper

feeder/scanner glass cleaning

Clean the document feeder/scanner glass when:
— Documents frequently misfeed.
— Smudges or black/white lines appear on the original doc-

ument when sending or copying.

1. Disconnect the power cord and the telephone line cord.

2. Open the front cover by pulling up the centre part.

3. Clean the document feeder rollers (

) and rubber flap

(

) with a cloth moistened with isopropyl rubbing alco-

hol, and let all parts dry thoroughly. Clean the scanner
glass (

) with a soft, dry cloth.

Caution:

•

Do not use paper products, such as paper towels or
tissues.

Summary of Contents for KX-FP701ME
















































































































































































































Search results

Summary of Contents for KX-FP701ME

Reviews:

Related manuals for KX-FP701ME

Brands by name

Popular brands

Panasonic KX-FP701ME, Service Manual

Search results

Summary of Contents for KX-FP701ME

Reviews:

Related manuals for KX-FP701ME

Brands by name

Popular brands