Panasonic KX-FP300E Operating Instructions Manual Download Page 37

Page: 37 / 150

Volumes

Initial Preparation

Adjusting volumes

Ringer volume

4 levels (high/middle/low/off) are available.
While the unit is idle, press or .

To turn the ringer off:

1. Press

repeatedly until the following message

is displayed.

Display:

2. Press .

●

To turn the ringer back on, press

While the ringer volume is set to off:
The display will show the following message.

When a call is received, the unit will not ring and will
display the following.

Monitor/Speaker volume

8 levels (high to low) are available.
While using the monitor/speakerphone,
press or .

Fax voice guidance volume

(KX-FP320/KX-FM330 only)

9 levels (high to off) are available.
While listening to the fax voice guidance,
press or .

Answering device volume

(KX-FP320/KX-FM330 only)

9 levels (high to off) are available.
While listening to the recorded messages,
press or .

INCOMING CALL

RINGER OFF

START/SET/COPY

YES: PRESS SET

RINGER OFF= OK?

START/SET/COPY

Summary of Contents for KX-FP300E























































































































































Search results

Summary of Contents for KX-FP300E

Reviews:

Related manuals for KX-FP300E

Brands by name

Popular brands

Panasonic KX-FP300E, Operating Instructions Manual

Search results

Summary of Contents for KX-FP300E

Reviews:

Related manuals for KX-FP300E

Brands by name

Popular brands