manualshive.com logo in svg

Panasonic KX-FP141AL, Operating Instructions Manual

Share
Download
Panasonic KX-FP141AL Operating Instructions Manual Download Page 66

9. Help

64

Cleaning

9.6 Recording paper 
feeder cleaning

Clean the recording paper feeder when:
–

The recording paper frequently misfeeds.

Important:

L

Remove the recording paper and the 
paper tray beforehand, or the paper may 
misfeed or jam.

1

Disconnect the power cord and the 
telephone line cord.

2

Open the front cover by pulling up the centre 
part.

3

Release the back cover by pushing the green 
button (

1

).

4

Open the back cover.

5

Open the recording paper feeder cover (

1

).

6

Clean the recording paper feeder roller (

1

) 

with a cloth moistened with isopropyl rubbing 
alcohol, and let all parts dry thoroughly.

Caution:

L

Do not use paper products, such as 
paper towels or tissues.

7

Close the covers (see steps 8 and 9 on page 
62).

8

Install the paper tray (page 14), then insert 
the recording paper (page 15).

9

Connect the power cord and the telephone 
line cord.

1

1

1

FP141-145AL.book  Page 64  Tuesday, October 21, 2003  11:07 AM

Summary of Contents for KX-FP141AL











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands