Panasonic KX-FP141AL Page 19 Operating Instructions Manual Download

Page: 19 / 74

2. Preparation

Help Button

2.2 Help function

The unit contains helpful information which can
be printed for quick reference.

Basic settings:

How to set the date, time, your logo and fax
number.

Feature list:

How to program the features.

Directory:

How to store names and numbers in the
navigator directory and how to dial them.

TAD operation (KX-FP145 only):

How to use the answering device.

Fax receiving:

How to set the unit to receive faxes.

Copier:

How to use the copier function.

Reports:

List of available reports.

Caller ID:

How to use the Caller ID service.

Press

{

HELP

}

Press

{<}

{>}

repeatedly to display the

desired item.

Press

{

SET

}

The selected item will be printed.

Volume

2.3 Adjusting volume

2.3.1 Ringer volume

4 levels (high/medium/low/off) are available.

While the unit is idle,

press

{A}

{B}

If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.

To turn the ringer OFF

Press

{B}

repeatedly to display “

RINGER

OFF= OK?

”.

Press

{

SET

}

When a call is received, the unit will not ring
and will display “

INCOMING CALL

”.

To turn the ringer back ON, press

{A}

Ringer pattern

You can select one of three ringer patterns
(feature #17, page 47).

2.3.2 Handset receiver volume

3 levels (high/middle/low) are available.

While using the handset,

press

{A}

{B}

2.3.3 Monitor/Speaker volume

8 levels (high to low) are available.

While using the monitor/speakerphone,

press

{A}

{B}

2.3.4 Voice guidance volume
(KX-FP145 only)

9 levels (high to off) are available.

While listening to voice guidance,

press

{A}

{B}

2.3.5 Answering device volume
(KX-FP145 only)

9 levels (high to off) are available.

While listening to recorded messages,

press

{A}

{B}

{

SET

}

{

HELP

}

{<}{>}

{

SET

}

{A}{B}

FP141-145AL.book Page 17 Tuesday, October 21, 2003 11:07 AM

Summary of Contents for KX-FP141AL











































































Search results

Summary of Contents for KX-FP141AL

Reviews:

Related manuals for KX-FP141AL

Brands by name

Popular brands

Panasonic KX-FP141AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FP141AL

Reviews:

Related manuals for KX-FP141AL

Brands by name

Popular brands