Panasonic KX-FLB853EX, Operating Instructions Manual

Page: 70 / 114

8. Programmable Features
68
{
0
}
“
OFF
”
{
1
}
“
ON
” (default)
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
4
}{
3
}{
4
}
.
3. Press
{
1
}
to select “
ON
” .
4. Press
{
SET
}
.
5. Enter your code from 2 to 4 digits, using 0–9,
{*}
and
{#}
.
L
The default code is “
;
#9
” .
L
Do not enter “0000”.
6. Press
{
SET
}
.
7. Press
{
MENU
}
.
{#}{
4
}{
3
}{
5
}
Setting the auto disconnection
AUTO DISCONNECT
=ON [
V^
]
To answer a call with an extension telephone in
TEL/FAX mode (page 40), activate this feature
and program the code.
{
0
}
“
OFF
”
{
1
}
“
ON
” (default)
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
4
}{
3
}{
5
}
.
3. Press
{
1
}
to select “
ON
” .
4. Press
{
SET
}
.
5. Enter your code from 2 to 4 digits, using 0–9
and
{*}
.
L
The default code is “
;
0
” .
6. Press
{
SET
}
.
7. Press
{
MENU
}
.
{#}{
4
}{
3
}{
6
}
Changing the silent fax
recognition ring setting
SILENT FAX RING
RINGS=3 [
V^
]
To change the number of times the unit rings
while in TEL/FAX mode.
{
3
}
“
3
” (default)
{
4
}
“
4
”
{
5
}
“
5
”
{
6
}
“
6
”
{
7
}
“
7
”
{
8
}
“
8
”
{
9
}
“
9
”
Note:
L
See page 40 for details.
{#}{
4
}{
3
}{
7
}
Setting the memory reception
alert
RECEIVE ALERT
=ON [
V^
]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
ON
” (default): You will be alerted to a
reception problem by a beeping sound.
{#}{
4
}{
3
}{
8
}
Setting friendly reception
FRIENDLY RCV
=ON [
V^
]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
{
0
}
“
OFF
” : You have to press
{
START
}
for fax
reception.
{
1
}
“
ON
” (default): You do not have to press
{
START
}
for fax reception.
{#}{
4
}{
4
}{
0
}
Setting the input tray to use for
faxing
FAX INPUT TRAY
=#1 [
V^
]
You can select the input tray that will be used for
printing received faxes.
{
1
}
“
#1
” (default): Paper input tray
{
2
}
“
#2
” : Multi-purpose input tray
L
When the optional input tray is installed, the
following will be displayed.
{
1
}
: “
#1
”
{
2
}
: “
#2
”
{
3
}
: “
#3
”
{
4
}
: “
#1+#3
” (default)
Note:
L
Lists or reports printed by pressing
{
HELP
}
(page 25) or
{
MENU
}
(page 95) will be fed
from the paper input tray.
L
When the input tray setting is set to “
#1+#3
” ,
the paper size in the paper input tray (feature
#380 on page 65) and the optional input tray
(feature #382 on page 65) should be the
same. If either of the paper size is changed,
the input tray setting will be changed to
“
#1
”
automatically.
{#}{
4
}{
4
}{
1
}
Setting the output tray to use
for faxing
FAX OUTPUT TRAY
=#3 [
V^
]
You can select the output tray that will be used
for printing received faxes.
FLB853EX-PFQX2373ZB-en.book Page 68 Tuesday, February 21, 2006 7:09 PM