Panasonic KX-FLB853EX, Operating Instructions Manual

Page: 68 / 114

8. Programmable Features
66
{#}{
4
}{
6
}{
3
}
Setting the default operation
mode
DEFAULT MODE
=COPY [
V^
]
To select the default operation mode when the
selected time of the mode timer (feature #464)
passes.
{
1
}
“
COPY
” (default): Copy mode is selected as
default.
{
2
}
“
FAX
” : Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this
feature.
{#}{
4
}{
6
}{
4
}
Setting the default operation
mode timer
MODE TIMER
=1min [
V^
]
To set the timer before returning to the default
operation mode (feature #463).
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
30s
” : 30 seconds
{
2
}
“
1min
” (default): 1 minute
{
3
}
“
2min
” : 2 minutes
{
4
}
“
5min
” : 5 minutes
{#}{
4
}{
8
}{
2
}
Setting toner save feature
TONER SAVE
=OFF [
V^
]
{
0
}
“
OFF
” (default): Deactivates this feature.
{
1
}
“
ON
” : The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by
reducing toner consumption.
8.4 Fax features
{#}{
2
}{
1
}{
2
}
Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2 [
V^
]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call.
{
2
}
“
2
” (default)
{
3
}
“
3
”
{
4
}
“
4
”
Note:
L
See page 40 for details.
{#}{
4
}{
0
}{
1
}
Printing a sending report
SENDING REPORT
=ERROR [
V^
]
To print a sending report for fax transmission
results (page 33).
{
0
}
“
OFF
” : Sending reports will not be printed.
{
1
}
“
ON
” : A sending report will be printed after
every transmission.
{
2
}
“
ERROR
” (default): A sending report will be
printed only when fax transmission fails.
{#}{
4
}{
0
}{
2
}
Setting the journal report to
print automatically
AUTO JOURNAL
=ON [
V^
]
{
0
}
“
OFF
” : The unit will not print a journal report,
but will keep a record of the last 30 fax
transmissions and receptions.
{
1
}
“
ON
” (default): The unit will print a journal
report automatically after every 30 new fax
transmissions and receptions (page 33).
{#}{
4
}{
0
}{
4
}
Changing the receiving mode
in the manual answer setting
MANUAL ANSWER
=TEL [
V^
]
{
1
}
“
TEL
” (default): Telephone mode (page 39)
{
2
}
“
TEL/FAX
” : Telephone/Fax mode (page 40)
{#}{
4
}{
1
}{
1
}
Sending documents overseas
OVERSEAS MODE
=ERROR [
V^
]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
FLB853EX-PFQX2373ZB-en.book Page 66 Tuesday, February 21, 2006 7:09 PM