Panasonic KX-FLB853EX, Operating Instructions Manual

Page: 21 / 114

1. Introduction and Installation
19
6
Close the paper input tray.
Note:
L
If the paper is not loaded correctly, re-adjust
the paper guides, or the paper may jam.
L
If the paper input tray does not close, the
plate in the paper input tray may be lifted.
Push the paper and check that the paper is
flat in the paper input tray.
To pull the paper input tray completely out
Pull the paper input tray (
1
) until it clicks into
place, then pull it completely out, lifting the front
part of the tray.
L
To insert the paper input tray
Insert the paper input tray (
1
) to the unit,
lifting the front part of the tray. Then push it
completely into the unit.
Using the optional input tray
You can add the optional input tray (Model No.
KX-FA101E/KX-FA101X) . See page 11 for
accessory information.
A4, letter or legal size recording paper can be
used.
The optional input tray can hold:
–
Up to 500 sheets of 60 g/m
2
to 75 g/m
2
paper.
– Up to 460 sheets of 80 g/m
2
paper.
– Up to 400 sheets of 90 g/m
2
paper.
L
The unit is set for A4 size paper by default.
If you want to use letter or legal size
paper, change the setting:
– by using
{
PAPER TRAY
}
in the copy
mode (page 47).
– in feature #382 (page 65).
Important:
L
Before starting installation of the optional
input tray, be sure to turn the power
switch OFF. For more details about the
installation, please refer to the installation
guide for the optional input tray.
L
After installation, you can select the
optional input tray for faxing or copying.
–
input tray setting for faxing (feature
#440 on page 68)
– input tray setting for copying (feature
#460 on page 69)
L
To use the optional input tray with your
computer, you need to change the printer
properties. See page 58 for details.
Caution for the paper input tray / the
optional input tray
L
Do not drop the input tray.
1
1
FLB853EX-PFQX2373ZB-en.book Page 19 Tuesday, February 21, 2006 7:09 PM