Panasonic KX-FL403EX Page 17 Operating Instructions Manual Download

Page: 17 / 74

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord included in
this unit.

Do not extend the telephone line cord.

Note:

To avoid malfunction, do not position the fax machine
near appliances such as TVs or speakers which
generate an intense magnetic field.

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows.

Telephone line cord

Connect to a single telephone line jack.

Power cord

Connect to the power outlet
(220 – 240 V, 50/60 Hz).

[

EXT

]

jack

You can connect an answering machine (page
35) or a telephone.

Answering machine (not included)

This model is designed to be used in Czech, Hungary
and Slovakia.

TO USE IN CZECH, HUNGARY AND

SLOVAKIA, CHANGE THE LOCATION SETTING

(feature #74 on page 44). The language selection is
also available (feature #48 on page 43).

FL403EX-PFQX2606ZA-en.book Page 15 Friday, July 28, 2006 10:26 AM

Summary of Contents for KX-FL403EX











































































Search results

Summary of Contents for KX-FL403EX

Reviews:

Related manuals for KX-FL403EX

Brands by name

Popular brands

Panasonic KX-FL403EX, Operating Instructions Manual

Search results

Summary of Contents for KX-FL403EX

Reviews:

Related manuals for KX-FL403EX

Brands by name

Popular brands