Panasonic KX-FL403EX Operating Instructions Manual Download

Page: 62 / 74

7. Help

Close the front cover (

) by pushing down on both

sides, until locked.

Place the handset on the cradle and attach the
document stacker.

7.7 No feeding or multiple feeding
occurs

If no feeding or multiple feeding occurs frequently, adjust
the feeder pressure.
Shift the position of the green lever (

) using a stick-

like-instrument with a pointed end.

Right:

When documents do not feed.

Centre:

Standard position (pre-selected)

Left:

When documents multi-feed.

Cleaning

7.8 Cleaning the inside of the unit

Clean the inside of the unit:
–

If misfeeding of your original occurs frequently.

–

If a black line, a white line or a dirty pattern appears
on your recording paper, on your original, or on the
fax document received by the other party.

Caution:

Be careful when handling the drum and toner
unit.
See the caution for the drum unit on page 53 for
details.

Do not use paper products, such as paper towels
or tissues, to clean the inside of the unit.

Disconnect the power cord and the telephone line
cord.

Remove the handset and document stacker.

Lift open the front cover (

), holding the OPEN tab

(

Caution:
The fuser unit (

) gets hot. Do not touch

it.

FL403EX-PFQX2606ZA-en.book Page 60 Friday, July 28, 2006 10:26 AM

Summary of Contents for KX-FL403EX











































































Search results

Summary of Contents for KX-FL403EX

Reviews:

Related manuals for KX-FL403EX

Brands by name

Popular brands

Panasonic KX-FL403EX, Operating Instructions Manual

Search results

Summary of Contents for KX-FL403EX

Reviews:

Related manuals for KX-FL403EX

Brands by name

Popular brands