Panasonic KX-FC265CX-S, Service Manual

Page: 100 / 267

100
KX-FC265CX-S
OK means "can set".
NG means "can not set".
Note:
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset
- To set the cordless handset ringtone for outside calls, see
Cordless Handset Programming (P.57).
- To set the cordless handset LCD display contrast, see Cordless Handset Programming (P.57).
- To set the cordless handset language, see Cordless Handset Programming (P.57).
Refer to Service Function Table (P.63) for descriptions of the individual codes.
Example:
If you want to set value in the "004 Print sending report", press the dial key number 1 or 2 corresponding to the Set Value you
want to select. (1:ERROR / 2:ON)
559 Document jam detection 1:ON / 2:OFF ON OK
561 Key test --------- --------- NG
567 T0 timer 001~255sec 046sec OK
570 Break % select 1:61% / 2:67% 61% OK
571 ITS auto redial time set 00~99 05 OK
572 ITS auto redial line disconnection time set 001~999sec 185sec OK
573 Remote turn-on ring number 01~99 10 OK
590 FAX auto redial time set 00~99 05 OK
591 FAX auto redial line disconnection time set 001~999sec 185sec OK
592 CNG transmit select 1:OFF / 2:ALL / 3:AUTO ALL OK
593 Time between CED and 300 bps 1:75ms / 2:500ms / 3:1sec 75ms OK
594 Overseas DIS detection 1:1st / 2:2nd 1st OK
595 Receive error limit value 1:5% / 2:10% / 3:15% / 4:20% 10% OK
596 Transmit level set 00~15 x -1dbm 10 x -1dbm OK
598
*1
Receiving Sensitivity 20~48 x -1dbm 44 x -1dbm OK
599 ECM frame size 1:256 byte / 2:64 byte 256 byte OK
710 Memory clear except history data --------- --------- NG
717 Transmit speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps OK
718 Receive speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps OK
722 Redial tone detect 1:ON / 2:OFF ON OK
745 Power on film feed 1:ON / 2:OFF ON OK
763 CNG detect time for friendly reception 1:10s / 2:20s / 3:30s 30s OK
773 DIS-DCS interval 1:500msec / 2:200msec 200ms OK
774 T4 timer 00~99 x 100ms 00ms OK
784 Voice prompt --------- --------- NG
815 Sensor test --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~9 mm 5 mm OK
861 Paper size 1:A4 / 2:Letter A4 OK
874 DTMF ON time 06~20
×
10msec 10
×
10msec OK
875 DTMF OFF time 06~20
×
10msec 10
×
10msec OK
880 History list “Set” Key --------- NG
881 Journal 2 Set --------- NG
882 Journal 3 Set --------- NG
961 The time transmitting the false ring back tone 01~10 sec 07 sec OK
962 The operator calling time 05~30 sec 10 sec OK
991 Remote Setup list 1: Print start --------- OK
994 Remote Journal list 1: Print start --------- OK
995 Remote Journal 2 list 1: Print start --------- OK
996 Remote Journal 3 list 1: Print start --------- OK
998 Remote History list 1: Print start --------- OK
999 Remote Service list 1: Print start --------- OK
Code Function Set Value Default Remote Set-
ting