8. Options
63
L
All the registered handset numbers are
displayed and the pre-selected handset
number flashes.
7
Press the desired handset number(s).
L
The selected handset number(s) will
flash.
L
To cancel a selected handset number,
press the number again. The number will
stop flashing.
8
Press
{>}
or
{j}
.
9
Press
{ih}
.
Setting the selected handset(s) then all
handsets to ring
1
Press
{j}
.
2
Press
{e}
or
{v}
repeatedly to display
“
SETTING BS
”.
3
Press
{>}
.
L
“
INPUT CODE
” will be displayed.
4
Press
{
1
}
.
5
Enter the 4-digit base unit PIN.
L
The default PIN is “
0000
”.
6
Press
{
3
}
to select “
3
”.
L
All the registered handset numbers are
displayed and the pre-selected handset
number flashes.
7
Press the desired handset number(s).
L
The selected handset number(s) will
flash.
L
To cancel a selected handset number,
press the number again. The number will
stop flashing.
8
Press
{>}
.
9
Press the desired number of rings for the
selected handset(s) from “
1
” to “
6
”, using the
dial keypad.
L
The default setting is “
3
”.
L
The selected number of rings will be
shown on the right edge of the display.
10
Press
{>}
or
{j}
.
11
Press
{ih}
.
8.4 Intercom between
handsets
You can use your handsets as a 2-way intercom.
L
Keep the front cover page open for button
locations.
Example: When handset 1 calls handset 2
1. Handset 1:
Press
{
INT
}
and
{
2
}
(desired handset
number).
2. Handset 2:
Press
{C}
to answer.
3.
When finished talking, press
{ih}
.
Note:
L
Intercom calls can be conducted within the
radio cell of the current base unit, but not with
units in neighbouring radio cells.
8.5 Transferring calls
between
handsets/Conference call
Intercom can be used to transfer an external call
between handsets that are registered to the
same base unit.
L
Keep the front cover page open for button
locations.
Example: When handset 1 transfers a call to
handset 2
1. Handset 1:
During an external call, press
{
INT
}
and
{
2
}
(desired handset number).
L
If there is no answer, press
{
INT
}
to return
to the external call.
2. Handset 2:
Press
{C}
to answer the page.
L
Handset 2 can talk with handset 1.
L
The external call will be put on hold.
3. Handset 1:
To complete the call transfer, press
{ih}
.
OR
To establish the conference call, press
{
3
}
.
To transfer a call directly, without speaking to
handset 2
After step 1, press
{ih}
on handset 1.
If the transferred call is not answered within 30
seconds, handset 1 will ring again.
FC195E.book Page 63 Wednesday, March 5, 2003 7:15 PM
