Panasonic KX-FC195E Operating Instructions Manual Download Page 22

Page: 22 / 86

2. Preparation

2.2 Battery charge

Place the handset on the cradle of the base
unit for about 7 hours before initial use.

Note:

Clean the handset charge contacts (

) and

the base unit charge contacts (

) with a dry

cloth once a month, or the batteries may not
charge properly.

Battery strength

During charging, the battery icon on the
handset display is shown as follows.

When the batteries are fully charged,

0677794

flashes.

The handset is automatically turned on when
placed on the base unit.
In normal use, the handset and the base unit
should be powered on at all times.

While the handset is off the base unit, the
battery icon is shown as follows.

Battery life

–

When using fully charged nickel metal
hydride (Ni-MH) batteries (700 mAh):
Talk time: Approx. 10 hours
Standby time: Approx. 120 hours

–

When using fully charged nickel cadmium
(Ni-Cd) batteries (250 mAh):
Talk time: Approx. 4 hours
Standby time: Approx. 40 hours

Times indicated are for peak performance.

The batteries cannot be overcharged.

For maximum battery life, it is recommended
that the handset is not recharged until

0688794

flashes or the handset beeps

intermittently while it is in use.

Battery life is dependent on usage conditions
and ambient temperature.

Important:

To prevent battery consumption, be sure
to press

{ih}

if a busy tone sounds

when/after using the handset.
e.g., After receiving fax documents using
the handset.

Help Button

Battery icon

Battery strength

67779

High

68779

Medium

68879

Low

0688794

Needs to be recharged

FC195E.book Page 20 Wednesday, March 5, 2003 7:15 PM

Summary of Contents for KX-FC195E























































































Search results

Summary of Contents for KX-FC195E

Reviews:

Related manuals for KX-FC195E

Brands by name

Popular brands

Panasonic KX-FC195E, Operating Instructions Manual

Search results

Summary of Contents for KX-FC195E

Reviews:

Related manuals for KX-FC195E

Brands by name

Popular brands