6. Answering Device
44
Incoming Messages
6.3 Listening to recorded
messages
When the unit has recorded new voice
messages:
–
The PLAY MESSAGES indicator will flash.
–
The display will show the total number of
recorded messages.
Example:
02
–
The unit will beep slowly if the message alert
feature is activated (feature #42, page 52).
Press
{
PLAY MESSAGES
}
.
L
Only the new recorded messages will be
played.
L
Adjust the speaker volume using
{A}
or
{B}
.
L
After playing back all of the new messages,
the PLAY MESSAGES indicator will stop
flashing but will remain lit up. If you press
{
PLAY MESSAGES
}
at this time, all the
recorded messages will be played.
To repeat a message
Press
{<}
while listening to the message.
L
If you press
{<}
within 5 seconds of the
beginning of the message, the previous
message will be played.
L
To play back a specific message, press
{<}
or
{>}
and search for the message you want
to listen to.
To skip a message
Press
{>}
to play the next message.
To stop playback temporarily
Press
{
STOP
}
.
L
If you press
{
PLAY MESSAGES
}
within 1
minute, the unit will resume playing the rest of
the messages.
Voice time/day stamp
During playback, a synthesised voice will
announce the day of the week and time that each
message was recorded.
To change the playback speed
Press
{
QUICK
}
to play messages at one and a
half times the original speed. Press
{
SLOW
}
to
play messages at half the original speed.
L
To return to the original speed, press either
{
QUICK
}
or
{
SLOW
}
again during quick or
slow playback.
6.3.1 Erasing recorded
messages
To erase a specific message
Press
{
ERASE
}
while listening to the message
you want to erase.
To erase all the messages
1.
Press
{
ERASE
}
.
2.
Press
{
SET
}
.
3.
Press
{
SET
}
again.
L
Messages recorded in the voice mailbox will
not be erased.
Remote Operation
{
SET
}
{<}{>}{A}{B}
{
STOP
}
PLAY MESSAGES
FLASH/LIGHT
{
ERASE
}
{
QUICK
}
{
SLOW
}
FC195E.book Page 44 Wednesday, March 5, 2003 7:15 PM
