Panasonic KW2G Eco-POWER METER User Manual Download

Page: 121 / 135

KW2G / KW2G-H Eco-POWER METER

112

6) Cells of unit that its firmware is updated correctly are white.
You can confirm with the display of Eco-POWER METER.

After upgrading, [ROMV] is displayed on the upper line and version is displayed on the lower line.

〔

Display of Eco-POWER METER

〕

After completing download, cell of unit that its firmware is not updated, is yellow and cell of unit that
updating is failure is red.
On the display of Eco-POWER METER, [PROG] is displayed on the upper line and [

‐

] is

displayed on the lower line.
Check and confirm the wiring of Eco-POWER METER and so on and update again.

〔

Display of Eco-POWER METER

〕

Summary of Contents for KW2G Eco-POWER METER








































































































































Search results

Summary of Contents for KW2G Eco-POWER METER

Reviews:

Related manuals for KW2G Eco-POWER METER

Brands by name

Popular brands

Panasonic KW2G Eco-POWER METER, User Manual

Search results

Summary of Contents for KW2G Eco-POWER METER

Reviews:

Related manuals for KW2G Eco-POWER METER

Brands by name

Popular brands