Panasonic KV-S6055W, Service Manual

Page: 75 / 267

9.4.4. Other Setting Mode (Normal Mode 4)
No Item Setting Contents Default Factory
Setting
1
Version (Disp. firmware
version) - -
2
Buzzer OFF ON ON ON
3 SCSI-ID No. 0~7 6 6
4 Terminator Dis- able Enable Enable Enable
5 Transfer Rate 20MByte
/sec 10MByte
/sec
20MByte/
sec 20MByte/
sec
6-a Clean Roller (Disp. %) ~% 0% 0%
6-b Clean Roller (Clear
warning for “Clean
Roller”)
Clear <> - -
7-a Replace Roller (Disp. %) ~% 0% 0%
7-b Replace Roller (Clear
warning for “Replace
Roller”)
Clear - -
8 Product ID KV-S6055W
series KV-
S6055 KV-
SS855 KV-
S2065 KV-
S2055 KV-
S6045 KV-S6055 KV-S6055
KV-S6050W
series KV-
S6050 KV-
SS855 KV-
S2065 KV-
S2055 KV-
S6040 KV-S6050 KV-S6050
9 Sleep Mode (Set period
to enter in Sleep Mode) Dis- able After 1
min~ 60
min
15 min 15 min
Note:
- If the scanner is the last device in the SCSI chain, then the
terminator should be set to “Enable”. But, under the above SCSI
chain and scanner’s turn-off, the terminator should be attached to
the SCSI connector on the scanner.
- Setting the SCSI ID will be activated after turning the power OFF
and turning it ON again.
- Setting the terminator will be activated after turning the power OFF
and turning it ON again.
9.4.5. Service Setting Mode (Service Mode 1)
75