Panasonic KV-S6055W, Service Manual

Page: 78 / 267

No Item Setting Contents Default Factory
Setting
12 DIMM SPD
(Information)
- - -
13 Memory Test START - -
14 Sleep Mode START - -
15 Init. EEPROM START - -
16 Double Feed Test
(Check double feed
sensitivity after
setting input-level)
0~255 START Current
Value -
17 Adjust Double feed
Detector
START - -
18 Adjust Length
Automatically
START - -
19 Adjust Front V.
Position
Automatically
START - -
20 Adjust Front H.
Position
Automatically
START - -
21 Adjust Front width
Automatically
START - -
22 Adjust Back V.
Position
Automatically
START - -
23 Adjust Back H.
Position
Automatically
START - -
24 Adjust FB Length
Automatically
START - -
25 Adjust FB V.
Position
Automatically
START - -
26 Adjust FB H.
Position
Automatically
START - -
27 Adjust all position &
length Automatically
START - -
28 Adjust shading START - -
Note:
- CCD Test AMP1 (2) (Set gain for Amp1 (2) and test)
When checking lighting level only from the front side, set the level
to zero on B. CIS LED (Set LED level and test).
- B CIS LED (Set LED level and test)
When checking lighting level from the back side, set the above
AMP1 to “Lamp OFF”.
9.5. Setting Operation (Normal Mode)
9.5.1. Scan Setting Mode (Normal Mode 1)
9.5.1.1. Mode-1
9.5.1.2. Mode-2
9.5.2. Counter Setting Mode (Normal Mode 2)
78