Panasonic KV-S5046H Service Manual Download Page 51

Page: 51 / 325

8.3.

Back Block

8.3.1.

Imprinter Door

8.3.2.

Rear Cover

1. Open the Imprinter Door.

2. While pushing the ribs of the door in the direction of the
arrow (1), pull the door away in the direction of the arrow (2)
to remove it.

1. Remove the Imprinter Door. (See 8.3.1.)

2. Remove the 2 screws.

3. Push the ADF Door Release to open the ADF Door.

4. Remove the 2 screws (1 from each side).

5. While pulling the hinge areas of the Rear Cover outwards,
pull the cover backward to remove it.

Summary of Contents for KV-S5046H




































































































































































































































































































































Search results

Summary of Contents for KV-S5046H

Reviews:

Related manuals for KV-S5046H

Brands by name

Popular brands

Panasonic KV-S5046H, Service Manual

Search results

Summary of Contents for KV-S5046H

Reviews:

Related manuals for KV-S5046H

Brands by name

Popular brands