Panasonic KV-S5046H, Service Manual

Page: 103 / 325

103
Fig.9.3.2.3 Error Code
Classifica-
tion
Code
Error Code Contents
ST1 ST2 ST3 ST4
- 00 00 00 00 No error
- 0A 00 00 00 Stop by clicking “STOP”
- 0B 00 00 00 Stop by ADF stop-command
U11 11 00 00 00 Paper feed jam (Paper didn’t reach the Waiting Sensor.)
U12 12 00 00 00 Conveyor jam 1 (Paper didn’t reach the Slip Detect Sensor.)
U13 13 00 00 00 Conveyor jam 2 (Paper didn’t reach the Starting Sensor.)
U14 14 00 00 00 Conveyor jam 3 (Paper didn’t reach the Exit Sensor.)
U16 16 00 00 00 Exit jam (Paper did not pass through the Exit Sensor.)
*1
U18
18 *1
xx
00 00
Document remains in scanner (
*1
ST2: Sensor Information)
U23 1C 00 x 00 Double feed error (ST3:0 Feed interval /:3 Ultrasonic)
U25 1E 00 00 00 Detect document with staples (Double-feed detection)
*2
U26
1F *2
x
00 00 Detect document with staples (Bent-paper detection)
(
*2
ST2: Bent Sensors’ Information)
U30 20 00 00 00 ADF Door or Imprinter Door is open.
F17 87 x x 00 SD-RAM error
(ST2:1 SD-RAM error for the front default image /:2 SD-RAM error for the
back default image), (ST3:0 Memory check error /:1 Clock phase error)
F31 95 01 00 00 Analog IC (for front side) error
95 02 00 00 Analog IC (for back side) error
95 03 00 00 Analog IC (for front side) error and Analog IC (for back side) error
F33 97 00 00 00 USB IC error
F34 98 00 00 00 EEPROM error
F35 99 x 00 00
Image processing FPGA/DDR2 error (ST2: 0 FPGA configuration
error /:1 Front DDR2 error /:2 Back DDR2 error)
F36 9A 00 00 00 Front Gate Array error (Access error)
9A 01 00 00 Front Gate Array error (Shading RAM error)
F38 9C 00 00 00 Back Gate Array error (Access error)
9C 01 00 00 Back Gate Array error (Shading RAM error)
F40 30 00 00 00 Hopper error
F42 32 00 00 00 DFP Home Position error
F43 33 00 00 00 Platen (front) motor error
F44 34 00 00 00 Platen (back) motor error
F60 50 00 00 00 Front-side gain adjustment error
F61 51 00 00 00 Front-side black level adjustment error
F62 52 00 00 00 Back-side gain adjustment error
F63 53 00 00 00 Back-side black level adjustment error
F80 60 00 00 00 Double Feed Detector error
F90 9E x x x Sub-processor error
ST2 0:Communication errir 1:Memory error
ST3 0:Front error 1:Back error
ST4 0:Bent detect processor 1:Feature detection processor