8.1.2 Scanning by selecting "Output to" and the scan settings
from the home screen
Perform scanning by the following procedure.
1.
Touch the desired output destination.
•
For details, refer to "8.1.2.1 Basic operation when setting "Output to" settings" (page 69).
2.
Touch the desired setting from the scan settings.
•
For details, refer to "8.1.2.2 Basic operations for specifying scan settings" (page 72).
3.
Place the documents on the feed tray (page 49).
4.
Press the Start/Stop button (
) to start scanning.
•
If [Confirm Output Path] of [Function Setting] is enabled, the output path will be displayed on the LCD.
Confirm the output path, and then press the Start/Stop button (
) again.
•
If [Confirm Output Path] of [Function Setting] is disabled, scanning will start.
•
Remove documents after they have been scanned.
8.1.2 Scanning by selecting "Output to" and the scan settings from the home screen
68
