Using
33
The steps taken to attach the hand strap to
the product are described below.
!1"
Take note of which end of
the hand strap is which, and
pass the strap through the
strap holes at the top and
bottom.
!2"
Pass one end of the strap all
the way through, fold it back
as shown in the figure and
hold it in place with your
hand, and adhere the hook-
and-loop fastener.
!3"
Fold back the other end of
the strap so that it fits the
size of your hand, hold it in
place with your hand, and
adhere the hook-and-loop
fastener.
!4"
Place the pads on top: This
completes the process.
How to attach the hand strap
JT-B1_eng(PGQX1334ZA)_20130122.indd 33
2013/01/22 9:10:14