Panasonic Jetwriter KX-P7305 User Manual Download Page 150

Page: 150 / 277

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

Small dots are printed
at the different position
from the original

Media is wet or dry.

Set the

Adjustment to media

setting for

–

value (–1, –2 or

–3) (

see “Adjustment to Media”

on page 41

in “Settings and

Printing”).

Toner spots appear on
the page.

Toner spots put on the
photosensitive drum.

Wipe the photosensitive drum
with soft cloth (refer to

“Cleaning the Photosensitive
Drum” on page 37

The drum unit is damaged.

Replace the drum unit.

The corona wire in the drum unit is
dirty.

Clean the corona wire in the drum
unit (

see “Cleaning the Printer”

on page 8

The entire page prints in
black.

The drum unit is damaged.

Replace the drum unit.

Trouble

Possible Cause

Corrective Action

ABCD--------
-----------------
--------

Summary of Contents for Jetwriter KX-P7305






















































































































































































































































































Search results

Summary of Contents for Jetwriter KX-P7305

Reviews:

Related manuals for Jetwriter KX-P7305

Brands by name

Popular brands

Panasonic Jetwriter KX-P7305, User Manual

Search results

Summary of Contents for Jetwriter KX-P7305

Reviews:

Related manuals for Jetwriter KX-P7305

Brands by name

Popular brands