Panasonic Jetwriter KX-P7305 User Manual Download Page 67

Page: 67 / 277

Setting the Printer Driver

Macintosh

Basics

Windows

Edit

•

Text

Enables to create/edit a watermark text by entering/editing the text in the Text box.

•

Size

Enables to set the font size of the watermark. Drag each slider left or right or click

•

Angle

Enables to angle the watermark. Drag each slider left or right or click

• Fonts

Enables to select the font for the watermark text.

• Color

Enables to select the gray scale level for the watermark text.

On First Page Only

The watermark is printed on the first page only by checking on the check box.

Transparent Text

The watermark is printed with transparent text (shaded text) by clicking on the check box.

As Outline Only

The watermark is printed with outline text. It can be selected if the check of Transparent
Text is removed.

Position

The watermark is printed in the center of page by default. The position can be adjusted by
dragging the slider left or right or clicking

. To specify the position of watermark, it

enables to select the unit inch or mm by clicking on the check button.

• Center Watermark

Enables to reset the position of the watermark to the center of the page by clicking

[Center Watermark]

Summary of Contents for Jetwriter KX-P7305






















































































































































































































































































Search results

Summary of Contents for Jetwriter KX-P7305

Reviews:

Related manuals for Jetwriter KX-P7305

Brands by name

Popular brands

Panasonic Jetwriter KX-P7305, User Manual

Search results

Summary of Contents for Jetwriter KX-P7305

Reviews:

Related manuals for Jetwriter KX-P7305

Brands by name

Popular brands