![background image](http://html.mh-extra.com/html/panasonic/hx-a1m/hx-a1m_operating-instructions-manual_256238026.webp)
- 26 -
Using a Tripod Mount
The tripod mounting hole
A
of the tripod mount is compatible
with the screw (1/4-20 UNC) of a tripod, etc.
≥
If you attach a screw with a length of 6 mm or more to a Tripod
Mount, it may wobble.
1
While holding
D
, loosen the adjustment belt
B
until this unit can be passed through it by rotating
the tightening nut
C
towards UNLOCK.
2
Pass this unit through the adjustment belt
B
so
that this unit is in the position shown in the figure.
3
While holding
D
, tighten the adjustment belt
B
by
rotating the tightening nut
C
towards LOCK until
this unit is fastened securely.
≥
Adjust the adjustment belt with hands. Do not apply too much
force.
≥
Do not rotate the tightening nut more than necessary after
fastening this unit.
≥
Check the direction of this unit after attaching it.
≥
To correct the left/right tilt of this unit, loosen the adjustment
belt.
Attaching the tripod mount to a tripod, etc.
Attaching this unit to the Tripod Mount
UNLOCK
LOCK
UNLOCK
LOCK