![background image](http://html.mh-extra.com/html/panasonic/hx-a1m/hx-a1m_operating-instructions-manual_256238014.webp)
- 14 -
Inserting/removing a microSD card
Caution:
Check that the access lamp has gone off.
1
Rotate the terminal cover in the direction of the arrow to remove it.
2
Insert (remove) the microSD card into (from) the card slot.
≥
Insert the microSD card with its terminal side facing down. Push it straight in until it clicks into
place as shown in the figure.
≥
Press the centre of the microSD card and then pull it straight out.
3
Rotate the terminal cover in the opposite direction of Step 1 to attach it.
≥
Tighten it firmly to ensure that it is not loose.
≥
Do not touch the terminals on the back of the microSD card.
≥
For handling of microSD card, refer to page
.
∫
About the access lamp
≥
When this unit is accessing the microSD card (the access lamp is lit/flashing), do not perform the
following:
j
Remove the microSD card
j
Turn this unit off
j
Insert and remove the USB cable
j
Expose this unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/microSD card or this unit.
When using a microSD card not from Panasonic, or one previously used on other equipment, for
the first time on this unit, format the microSD card. (
) When the microSD card is formatted,
all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
A
Access lamp
≥
When this unit is accessing
the microSD card (e.g.,
detecting the card or
recording, playing back or
deleting files on it), the
access lamp will light/flash
red.