Setup the Power Measuring Unit
Installer Tasks
If the Power Measuring
Unit is to be positioned
in a consumer unit,
ensure that at least
50mm of space is
provided above the unit
an 230mm below the
unit. After determining
the position, tap the
“Next” button.
Refer to the diagram
for the installation of
the Power Measuring
Unit. To remove, use a
flat-head screwdriver
to lower the tab
before pulling out.
After installation, tap
the “Next” button.
Installation of the
Power Measuring
Unit must be carried
out by a competent
person.
If you are a compe-
tent person, tap the
“OK” button to
continue.
Follow the instructions in the
Panasonic HOME IoT App to
install and register the Power
Measuring Unit.
Tap the
“Power Measuring Unit”
button to start
registration.
1
Installation must be
carried out by a
competent person.
2
Ensure the main breaker
is opened before starting
the task.
Note
First, determine the
installation position of the
Power Measuring Unit.
3
Attach the Power
Measuring Unit to a rail
within the consumer unit.
4
Tapping the “Next”
button on the final
screen of
brings up the
screen to the left.
STEP2
STEP1
15
